- Send scan command: all 5 regions LED on, brightness 128
- Listen for ADC notify (17 bytes) instead of broken queryStatus
- Parse and display PD1-PD7 values with visual bars
- Show VBAT/battery info
- Store scan PD data in globalData for Phase 3 smart adjustment
- 8s timeout fallback, stop LED on page unload
Region name mapping corrected to match actual hardware IO positions:
- 0x01: 左区→右区, 0x02: 右区→左区
- 0x08: 下区→中区, 0x10: 中区→下区
Auto-scan no longer shows timeout error, proceeds to next step instead.
Fixes timeout during binding when targetDeviceId is set but exact
string match fails due to encoding differences. Also skips devices
with no name, and logs match result for every candidate.
- parseDeviceId accepts hex with spaces (e.g. "672B6D5A 4DCD861")
- BLE scan does exact match on "JW_<device_id>" when target is known
- Manual input placeholder updated to show new format
Replace '光子美容仪' with '智美'/'智能面膜'/'我的设备' throughout.
Replace '护理' with '使用' in all UI text.
Replace '皮肤' with '检测'/'智能' where applicable.
Replace 🌸 with 💎 for brand identity.
Internal code (variable names, API paths, file names) unchanged.
- ADC (17-byte) now emits 'adc' + 'battery' events, not 'status'
- Fixes CRITICAL timer jump: remaining_ms:0 was resetting countdown
- Drop ADC packets with bad XOR checksum
- treating.js + index.js subscribe to 'battery' for live battery updates
- onStatus only updates remaining_ms when > 0
Protocol update adds FFE4 Status format: 7×PD sensors (little-endian)
+ VBAT battery voltage (mV) + XOR checksum = 17 bytes.
- parseVendorStatus: handles 1-byte heartbeat, 17-byte ADC, 33-byte params
- handleValueChange: ADC type extracts PD array + battery % from VBAT
- Battery calculated as linear 3000mV(0%) to 4200mV(100%)
- PD data passed through status event for treatment pages
- Updated protocol doc with full byte table and old/new comparison
- Loading animation only shows on first visit, subsequent onShow updates silently
- Subscription row always navigates to plans page (was no-op when active)
- Move devMode init to onLoad (only needs to run once)
- Device card: top row with icon+name+badge, reconnect button below
- Action buttons wrapped in flex column with 20rpx gap
- Removed inline device-battery, now part of device-meta row
1. Move notify route before authMiddleware (WeChat callback has no JWT)
2. Add await to verifyNotifySignature call (was fire-and-forget)
3. Remove dangerous verify fallback — all signature failures now throw
4. Payment sync polls 3x before giving up, never redirects to success
page unless confirmed paid
5. Production guard enforces all WX_MCH_* env vars on startup
Server:
- New lib/wxpay.js: native crypto RSA-SHA256 signing, JSAPI prepay,
AES-256-GCM notify decryption, order query (no npm deps)
- New dao/payment-order.dao.js: createOrder, markPrepay,
markPaidAndActivateSubscription (idempotent + transactional)
- New routes/payment.js: GET order status, POST order sync
- New routes/payment-notify.js: WeChat async callback handler with
signature verification, amount/appid/mchid validation
- Modified subscription/purchase: auto-detects wxpay config, returns
real payment_params or mock fallback
- Schema: payment_orders table with out_trade_no unique key
- app.js: express.raw() for notify path, payment routes mounted
- config.js: wxpay block with 7 env vars
- .env.example: all WeChat Pay fields documented
- .gitignore: certs/, *.pem, *.p12
Miniprogram:
- subscribe-plans doPurchase: calls real purchase API, falls back to
mockPurchase only when server returns mock:true
- Added syncAndRedirect for post-payment order confirmation
- api.js: getPaymentOrder, syncPaymentOrder
- Removed "模拟支付"/"测试环境" from UI text
Miniprogram:
- Add BLE reconnect button on home page when disconnected
- Add loading states to index, profile, subscribe-plans pages
- Add profile editing (avatar + nickname) with COS upload
- Enable pull-to-refresh on history page
- Fix auto-scan self.options → self.data inconsistency
- Add console.error to silent catch blocks
- Gate 'Simple Peripheral' BLE scan behind __DEV__ flag
- Add production config comment to env.js
Admin console:
- Add empty state '暂无数据' to all 5 list views
- Replace plain text plan input with select dropdown
- Add type="date" to record date filters
- Add production config comment
Server:
- CORS origin restricted in production (env CORS_ORIGIN)
- DB pool size configurable via DB_POOL_SIZE env var
- .env.example updated with WeChat Pay + production fields
- Retry button disconnects then re-scans for device (no page navigation)
- Prevents duplicate scan with checking guard
- Disconnect before scan with 500ms delay for adapter recovery
- Clears reconnect timer on success/error/unload
- Error text updated to guide user to retry button
- vendor_33 mode skips BLE wear detection (protocol doesn't support it)
and passes check immediately if device is connected
- Show error message if device is not connected
- Retry button navigates back if disconnected instead of re-checking
- onUnload disconnects BLE if not in 'done' state (prevents connection leak)
- onUnload clears retry timer to prevent setData on dead page
- Store retry setTimeout ref for proper cleanup
- onRetry clears bind_result listener before disconnect
- Add 1s delay after closeBluetoothAdapter before re-scanning
- Fix binding state text from '点击连接' to '正在配对...'
Heartbeat (1-byte FFE4 notify) now emits 'heartbeat' event only.
Only 33-byte state responses emit 'status' with parsed IO data.
Fixes timer jumping to 0 every second during treatment.
- handleValueChange now calls parseVendorStatus and emits 'status'
with legacy-compatible shape (mode_state, battery, remaining_ms, etc.)
- 1-byte heartbeat mapped to mode_state, 33-byte state parsed for
active IO detection
- Fixes regression where treating, index, wear-check, auto-scan pages
never received status updates in vendor_33 mode
- Also emits 'vendor_raw' with full parsed data for future use
- discoverChars uses properties (write/notify) to distinguish FFE1
command characteristic from FFE1 service UUID
- handleValueChange: vendor_33 mode emits vendor_status (FFE4 heartbeat)
and vendor_data separately, no longer tries parseFrame on raw bytes
- parseVendorStatus handles 1-byte heartbeat and 33-byte state readback
with proper IO1-IO5 field parsing
- Always sync treatment end (not just early stop), pass start/end times
- treatment-done uses api.syncTreatment instead of raw http.post
- Move getApp() from module level to onLoad in treatment-done
- Avatar upload only returns URL, no longer updates profile directly
- COS CDN domain configurable via COS_CDN_DOMAIN env var
- Fix operator precedence in request.js token expiry check
- Remove unused result variable from COS putObject
- Treatment start immediately syncs record with full 10min duration
- Early stop re-syncs with actual elapsed time (upsert by session_id)
- treatment-done page uses same session_id from treating page
- Replace chooseAvatar button with chooseMedia (more reliable, works on all versions)
- COS avatar URL uses tx.vsai.net.cn instead of generated bucket domain
- Phone shows '已授权' only (no actual number displayed)
- Keep body as Buffer instead of utf8 string for multipart/form-data
- Set content-length header for multer compatibility
- Phone authorization shows '已授权' instead of actual number
- loadProfile() now returns Promise (was missing return)
- Avatar upload via COS instead of storing WeChat temp path
- Add POST /user/avatar endpoint with multer + COS SDK
- Incomplete registration detection: redirect to register if phone is empty
- New register page with chooseAvatar, nickname input (random default),
and required phone number authorization via getPhoneNumber
- Login simplified: removed deprecated wx.getUserProfile, checks
is_new_user flag to redirect new users to registration
- Server login response now includes is_new_user field
- Add expire_time > NOW() filter to findActive() preventing stale subscriptions
- Add express-rate-limit on login endpoints (user: 10/15min, admin: 5/15min)
- Add production guard for default admin credentials
- Fix BLE bindDevice userId encoding (uint32 instead of hexToBytes on numeric)
- Wrap adminCreate in transaction to prevent race condition
- Add settings cache invalidation after admin saves
- Read trial_days from settings instead of hardcoding 7
- Fix double JSON.stringify in commandDao.finish call
- Cancel stale pending bindings before creating new ones
- Reduce token refresh grace period from 3 days to 1 day
- Fix subscribe-success to fetch expiry from server (correct for renewals)
- Add keep-alive name property to DashboardView and SettingsView
- Fix BLE disconnect() to preserve listener registrations across reconnects
Server:
- Add settings-cache with 60s TTL for feature toggle checks
- Enforce maintenance_mode on login, enable_binding on device bind
Admin console:
- Remove dead "发送通知" button from user detail
- Firmware check calls real API and compares versions
Miniprogram:
- Wear-check: dynamic battery/connected from BLE state
- Login: hide non-functional phone auth button
- Treating: show actual selected regions instead of hardcoded "全脸"
- Index: display subscription status with tap to manage
- Auto-scan: show "待检测" instead of "--" for PD data
- Agreements: tap shows "内容建设中" modal
- Subscription purchase now extends expire_time when user has active
subscription, instead of cancelling and replacing
- Admin subscription creation uses same extend logic
- Subscribe page shows "续费" button and extend message for renewals
- Help and contact pages: add pink header, centered icon + text
POST /api/v1/subscription/purchase only creates an order without
activating. Add POST /api/v1/subscription/mock-purchase that does
purchase + verify in one step (non-production only). Miniprogram
subscribe page now calls mock-purchase so subscriptions take effect.
- Add GET /api/v1/subscription/plans public endpoint for pricing
- Subscription API now returns trial_used field
- Subscribe-plans page shows trial card, greyed out with "已使用" tag
when trial has been used
- Trial activation calls dedicated trial API, not purchase
- Prices fetched from server settings, fallback to defaults
Guoguo