- Remove parseVendorStatus 17-byte branch (FFE4 is now 19 bytes)
- Remove parseVendorStatus 33-byte branch (FFE1 is now 34 bytes)
- Remove buildVendorCommand33 deprecated alias
- Remove fitting/run_state !== -1 guards in connection.js
- Update commands.js to use buildVendorCommand directly
- parseVendorStatus: add checksum_ok verification for 34-byte and 33-byte params
- command-sync.js: passthrough control, current_gain, hold_time from server payload
- Mark buildVendorCommand33 as deprecated alias
Per 协议简述(3): FFE4 now 19 bytes — adds Byte17 fitting status
(0=not fitted, 1=fitted) and Byte18 run state (0=IDLE, 1=scanning,
2=treating, FF=fault). Maintains backward compat with 17-byte format.
Region name mapping corrected to match actual hardware IO positions:
- 0x01: 左区→右区, 0x02: 右区→左区
- 0x08: 下区→中区, 0x10: 中区→下区
Auto-scan no longer shows timeout error, proceeds to next step instead.
Fixes timeout during binding when targetDeviceId is set but exact
string match fails due to encoding differences. Also skips devices
with no name, and logs match result for every candidate.
- parseDeviceId accepts hex with spaces (e.g. "672B6D5A 4DCD861")
- BLE scan does exact match on "JW_<device_id>" when target is known
- Manual input placeholder updated to show new format
Replace '光子美容仪' with '智美'/'智能面膜'/'我的设备' throughout.
Replace '护理' with '使用' in all UI text.
Replace '皮肤' with '检测'/'智能' where applicable.
Replace 🌸 with 💎 for brand identity.
Internal code (variable names, API paths, file names) unchanged.
- ADC (17-byte) now emits 'adc' + 'battery' events, not 'status'
- Fixes CRITICAL timer jump: remaining_ms:0 was resetting countdown
- Drop ADC packets with bad XOR checksum
- treating.js + index.js subscribe to 'battery' for live battery updates
- onStatus only updates remaining_ms when > 0
Protocol update adds FFE4 Status format: 7×PD sensors (little-endian)
+ VBAT battery voltage (mV) + XOR checksum = 17 bytes.
- parseVendorStatus: handles 1-byte heartbeat, 17-byte ADC, 33-byte params
- handleValueChange: ADC type extracts PD array + battery % from VBAT
- Battery calculated as linear 3000mV(0%) to 4200mV(100%)
- PD data passed through status event for treatment pages
- Updated protocol doc with full byte table and old/new comparison
Miniprogram:
- Add BLE reconnect button on home page when disconnected
- Add loading states to index, profile, subscribe-plans pages
- Add profile editing (avatar + nickname) with COS upload
- Enable pull-to-refresh on history page
- Fix auto-scan self.options → self.data inconsistency
- Add console.error to silent catch blocks
- Gate 'Simple Peripheral' BLE scan behind __DEV__ flag
- Add production config comment to env.js
Admin console:
- Add empty state '暂无数据' to all 5 list views
- Replace plain text plan input with select dropdown
- Add type="date" to record date filters
- Add production config comment
Server:
- CORS origin restricted in production (env CORS_ORIGIN)
- DB pool size configurable via DB_POOL_SIZE env var
- .env.example updated with WeChat Pay + production fields
Heartbeat (1-byte FFE4 notify) now emits 'heartbeat' event only.
Only 33-byte state responses emit 'status' with parsed IO data.
Fixes timer jumping to 0 every second during treatment.
- handleValueChange now calls parseVendorStatus and emits 'status'
with legacy-compatible shape (mode_state, battery, remaining_ms, etc.)
- 1-byte heartbeat mapped to mode_state, 33-byte state parsed for
active IO detection
- Fixes regression where treating, index, wear-check, auto-scan pages
never received status updates in vendor_33 mode
- Also emits 'vendor_raw' with full parsed data for future use
- discoverChars uses properties (write/notify) to distinguish FFE1
command characteristic from FFE1 service UUID
- handleValueChange: vendor_33 mode emits vendor_status (FFE4 heartbeat)
and vendor_data separately, no longer tries parseFrame on raw bytes
- parseVendorStatus handles 1-byte heartbeat and 33-byte state readback
with proper IO1-IO5 field parsing
- Add expire_time > NOW() filter to findActive() preventing stale subscriptions
- Add express-rate-limit on login endpoints (user: 10/15min, admin: 5/15min)
- Add production guard for default admin credentials
- Fix BLE bindDevice userId encoding (uint32 instead of hexToBytes on numeric)
- Wrap adminCreate in transaction to prevent race condition
- Add settings cache invalidation after admin saves
- Read trial_days from settings instead of hardcoding 7
- Fix double JSON.stringify in commandDao.finish call
- Cancel stale pending bindings before creating new ones
- Reduce token refresh grace period from 3 days to 1 day
- Fix subscribe-success to fetch expiry from server (correct for renewals)
- Add keep-alive name property to DashboardView and SettingsView
- Fix BLE disconnect() to preserve listener registrations across reconnects
WeChat's require() does not support directory imports — require('./ble')
looks for ble.js, not ble/index.js. Add a proxy file that re-exports
from ble/index.js so all existing imports continue to work.
- bcrypt password hashing with auto-migration from SHA-256
- BLE command retry (3 attempts, 500ms delay, skip on disconnect)
- BLE auto-reconnect with service re-discovery on disconnect
- Treatment page disconnect/reconnect event handling
- Token refresh endpoint with 3-day grace period
- Client-side token auto-refresh when <24h remaining
- Single treatment record detail API with ownership check
Server:
- Block startup with default JWT secrets in production
- Make subscription verify admin-only (no payment integration yet)
- Add device ownership validation on command/result, event, treatment/sync
- Remove admin token from request body fallback
- Add pageParams boundary protection (pageSize capped at 100)
- Fix COS getObjectUrl to use callback-based Promise
- Add settings key whitelist matching frontend fields
- Add user existence check before subscription creation
- Fix firmware always returning has_update:true
- Replace hardcoded trial subscription with actual DB query
- Extract shared utilities (limitClause, toMysqlDate, formatDate)
Miniprogram:
- Replace fake PD random data with placeholder
- Mark client-timer treatment completions with source field
- Disable mock.js
- Fix BLE listener leaks (save refs, cleanup in onUnload)
- Fix ble.off clearing all listeners (pass specific callback)
- Add BLE disconnect detection via onBLEConnectionStateChange
- Fix subscription status type consistency (number not string)
- Fix scan callback accumulation in ble.js
- Fix history stats accumulation across pages
- Fix subscribe-success/treatment-done hardcoded values
- Fix profile subscription view logic
- Replace purchase flow with admin-contact modal
- Add error logging in command-sync report
Admin console:
- Fix AdminLayout logout (require->import, logout->clearToken)
- Remove all mock data from production request.js
- Replace dashboard fake data with real API calls
- Replace monthly_revenue with subscription_count
- Fix subscription stats fallback (|| -> ??)
- Add token expiry tracking (7 days)
- Unify device status map and subscription status text
- Fix user page record link navigation
- Fix subscription createForm.user_id type handling
- Add error feedback in all empty catch blocks
- Remove unused remember checkbox and uview-plus dependency
- Extract common CSS to shared stylesheet (-900 lines)
- Extract formatDate to shared utils/format.js
- Show real admin name in layout header
- fix manual bind stuck at BLE scan, redirect to bind-success
- add 15s timeout and stopScan to ble-connect
- add stopScan method to ble.js
- add back-to-home button on bind-success page
- fix field name in subscribe-plans (plan -> plan_type)
- fix history.js to handle created_at field
- fix index.js to handle device name field
- add subscription route alias in request.js
- extend admin cloud function from 1 to 9 actions
- add mock mode to admin-console request.js
- remove unused discover page and legacy record function
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Guoguo