- Add "start detection" button (not auto-start on page load)
- Send control=0x01 only when user clicks button
- Accumulate PD values across all ADC frames during scan
- Monitor run_state: wait for 0x01→0x00 transition as completion signal
- Calculate PD averages on completion
- Send treatment command (control=0x02) on "next" with calculated params
- TODO: plug in full NR diagnosis algorithm when PD→region mapping confirmed
Remove all fitting detection logic (setParams, fitting event listener,
timeout). User manually confirms wearing, then proceeds to detection
page. No BLE commands sent on this page.
- Remove parseVendorStatus 17-byte branch (FFE4 is now 19 bytes)
- Remove parseVendorStatus 33-byte branch (FFE1 is now 34 bytes)
- Remove buildVendorCommand33 deprecated alias
- Remove fitting/run_state !== -1 guards in connection.js
- Update commands.js to use buildVendorCommand directly
wear-check:
- Send weak pulse light (brightness=26) to trigger FFE4 fitting report
- Timeout degrades to pass (backward compat with 17-byte firmware)
- Sync _resolved flag prevents double-resolve
treating:
- Only treat run_state=0x00 as completion after seeing run_state=0x02
(prevents false completion on startup)
- Sync _finishing flag replaces async data.completed for race prevention
- onStatus preserves paused state during fitting loss (|| fittingLost)
- Remove dead _fittingTimer reference from onUnload
auto-scan:
- Sync _completed flag in _scanComplete prevents double-build
- Listen for 'fitting' event: detect skin detachment, pause on loss,
resume on re-attach
- Listen for 'run_state' event: detect device fault (0xFF) and IDLE
completion (0x00)
- Low battery warnings: toast at <=10%, force stop at <=5%
- Guard finishAsComplete against double-completion
- Proper cleanup of all new event listeners on unload
Firmware does R→UV→Y→IR sequential scan autonomously. Miniprogram
now listens for 4 consecutive ADC notifications, storing each as a
separate spectrum group. Also listens for run_state=IDLE as scan
completion signal. Displays all 4 spectrum groups with PD1-PD7 bars.
Stores full scan data in globalData.lastScanData for diagnosis phase.
Listen for 'fitting' event from FFE4 Byte17 (0=not fitted, 1=fitted).
10s timeout if no fitting signal received. Removes vendor_33 bypass
that always returned ok.
- parseVendorStatus: add checksum_ok verification for 34-byte and 33-byte params
- command-sync.js: passthrough control, current_gain, hold_time from server payload
- Mark buildVendorCommand33 as deprecated alias
Per 协议简述(3): FFE4 now 19 bytes — adds Byte17 fitting status
(0=not fitted, 1=fitted) and Byte18 run state (0=IDLE, 1=scanning,
2=treating, FF=fault). Maintains backward compat with 17-byte format.
- Extract _cleanup() to properly unregister ADC listener + clear timers
- ADC callback unregisters itself on first receive (prevent duplicates)
- setParams failure now stops scanning and clears all state
- Timeout handler unregisters ADC listener
- Add BLE connection check before scan
- SCAN_TIMEOUT 8s → 12s (must exceed hold_time 10s)
- Pre-compute barWidth in JS instead of float math in WXML
- Error only shows when scanning is false
- Send scan command: all 5 regions LED on, brightness 128
- Listen for ADC notify (17 bytes) instead of broken queryStatus
- Parse and display PD1-PD7 values with visual bars
- Show VBAT/battery info
- Store scan PD data in globalData for Phase 3 smart adjustment
- 8s timeout fallback, stop LED on page unload
Region name mapping corrected to match actual hardware IO positions:
- 0x01: 左区→右区, 0x02: 右区→左区
- 0x08: 下区→中区, 0x10: 中区→下区
Auto-scan no longer shows timeout error, proceeds to next step instead.
Fixes timeout during binding when targetDeviceId is set but exact
string match fails due to encoding differences. Also skips devices
with no name, and logs match result for every candidate.
- parseDeviceId accepts hex with spaces (e.g. "672B6D5A 4DCD861")
- BLE scan does exact match on "JW_<device_id>" when target is known
- Manual input placeholder updated to show new format
Replace '光子美容仪' with '智美'/'智能面膜'/'我的设备' throughout.
Replace '护理' with '使用' in all UI text.
Replace '皮肤' with '检测'/'智能' where applicable.
Replace 🌸 with 💎 for brand identity.
Internal code (variable names, API paths, file names) unchanged.
- ADC (17-byte) now emits 'adc' + 'battery' events, not 'status'
- Fixes CRITICAL timer jump: remaining_ms:0 was resetting countdown
- Drop ADC packets with bad XOR checksum
- treating.js + index.js subscribe to 'battery' for live battery updates
- onStatus only updates remaining_ms when > 0
Protocol update adds FFE4 Status format: 7×PD sensors (little-endian)
+ VBAT battery voltage (mV) + XOR checksum = 17 bytes.
- parseVendorStatus: handles 1-byte heartbeat, 17-byte ADC, 33-byte params
- handleValueChange: ADC type extracts PD array + battery % from VBAT
- Battery calculated as linear 3000mV(0%) to 4200mV(100%)
- PD data passed through status event for treatment pages
- Updated protocol doc with full byte table and old/new comparison
- Loading animation only shows on first visit, subsequent onShow updates silently
- Subscription row always navigates to plans page (was no-op when active)
- Move devMode init to onLoad (only needs to run once)
- Device card: top row with icon+name+badge, reconnect button below
- Action buttons wrapped in flex column with 20rpx gap
- Removed inline device-battery, now part of device-meta row
1. Move notify route before authMiddleware (WeChat callback has no JWT)
2. Add await to verifyNotifySignature call (was fire-and-forget)
3. Remove dangerous verify fallback — all signature failures now throw
4. Payment sync polls 3x before giving up, never redirects to success
page unless confirmed paid
5. Production guard enforces all WX_MCH_* env vars on startup
Server:
- New lib/wxpay.js: native crypto RSA-SHA256 signing, JSAPI prepay,
AES-256-GCM notify decryption, order query (no npm deps)
- New dao/payment-order.dao.js: createOrder, markPrepay,
markPaidAndActivateSubscription (idempotent + transactional)
- New routes/payment.js: GET order status, POST order sync
- New routes/payment-notify.js: WeChat async callback handler with
signature verification, amount/appid/mchid validation
- Modified subscription/purchase: auto-detects wxpay config, returns
real payment_params or mock fallback
- Schema: payment_orders table with out_trade_no unique key
- app.js: express.raw() for notify path, payment routes mounted
- config.js: wxpay block with 7 env vars
- .env.example: all WeChat Pay fields documented
- .gitignore: certs/, *.pem, *.p12
Miniprogram:
- subscribe-plans doPurchase: calls real purchase API, falls back to
mockPurchase only when server returns mock:true
- Added syncAndRedirect for post-payment order confirmation
- api.js: getPaymentOrder, syncPaymentOrder
- Removed "模拟支付"/"测试环境" from UI text
Guoguo