feat(diagnosis): 按新协议实现多光谱诊断算法+分区差异化下发+报告面罩图
- 新协议《协议简述-添加扫描时光色》落地: FFE4 Byte17 高3位=扫描光色(1红/2红外/3紫外/4暖黄), 低5位保留贴合状态; Byte18=0xFF 故障; auto-scan 按光色分桶采集(旧固件无标识归 red 桶降级) - diagnosis.js 重写: PD极性(值大=吸收多,固件已确认) NR=本区/本色5区平均-1; 每区4色argmax>0.10判定; 3路PD区几何平均+MAD剔奇异(3σ对n=3失效,审计实证); 严重度0.05/0.15/0.30仅展示; 全参数走 diagnosis_config 热调(极性/阈值/PD映射/亮度) - buildVendorCommand 支持 plan 多区多色单命令下发(每IO独立 红/红外/紫外/暖黄); builder层安全硬上限 治疗亮度≤204(80%) 时长≤600s - 区域映射修正: 掩码=IO纵列 左0x01/中上0x02/中0x04/中下0x08/右0x10, 修复 treatment-setup/manual/treating/getRegionName/i18n 共7处标签错位, FULL_FACE 0x7F→0x1F - 扫描报告页: 新增分区面罩示意图(5区按推荐光着色+模式名+严重度,点击跳光疗介绍), 推荐护理改一条命令多色下发(亮度204); 扫描中设备故障即时中止 - schema.sql diagnosis_config 种子更新(新结构); i18n 清理死键,中英对齐25/24键
这个提交包含在：
Guoguo
二进制文件未显示。
@@ -17,6 +17,7 @@ module.exports = {
|
||||
doneStatusPost: ' 帧），正在启动治疗...',
|
||||
notWorn: '面膜未佩戴好，请重新佩戴后再试',
|
||||
timeout: '检测超时，未收到数据，请重试',
|
||||
deviceFault: '设备异常，扫描已停止，请重启设备后再试',
|
||||
cmdFailed: '检测命令发送失败'
|
||||
},
|
||||
en: {
|
||||
@@ -35,6 +36,7 @@ module.exports = {
|
||||
doneStatusPost: ' frames), starting treatment...',
|
||||
notWorn: 'The mask is not worn properly. Please re-fit and try again',
|
||||
timeout: 'Scan timed out with no data. Please try again',
|
||||
deviceFault: 'Device error — scan stopped. Please restart the device and try again',
|
||||
cmdFailed: 'Failed to send scan command'
|
||||
}
|
||||
}
|
||||
|
||||
@@ -18,12 +18,14 @@ module.exports = {
|
||||
saveFailed: '保存失败',
|
||||
networkError: '网络异常，请重试',
|
||||
deviceNotConnected: '设备未连接',
|
||||
// 区域 = IO 纵列布局：left=IO1(0x01) top=IO2(0x02中上) middle=IO3(0x04中)
|
||||
// bottom=IO4(0x08中下) right=IO5(0x10)。key 名沿用，语义以掩码为准。
|
||||
regions: {
|
||||
right: '右区',
|
||||
left: '左区',
|
||||
top: '上区',
|
||||
top: '中上区',
|
||||
middle: '中区',
|
||||
bottom: '下区'
|
||||
bottom: '中下区',
|
||||
right: '右区'
|
||||
},
|
||||
wavelengths: {
|
||||
red: '红光',
|
||||
@@ -51,11 +53,11 @@ module.exports = {
|
||||
networkError: 'Network error, please retry',
|
||||
deviceNotConnected: 'Device not connected',
|
||||
regions: {
|
||||
right: 'Right',
|
||||
left: 'Left',
|
||||
top: 'Top',
|
||||
top: 'Upper Center',
|
||||
middle: 'Center',
|
||||
bottom: 'Bottom'
|
||||
bottom: 'Lower Center',
|
||||
right: 'Right'
|
||||
},
|
||||
wavelengths: {
|
||||
red: 'Red',
|
||||
|
||||
@@ -5,6 +5,9 @@ module.exports = {
|
||||
subtitle: '基于多光谱反射的肤质倾向参考',
|
||||
scannedAt: '扫描时间',
|
||||
overallTitle: '整体倾向',
|
||||
faceTitle: '分区光疗方案',
|
||||
faceTapHint: '点击分区可查看该光的功效介绍',
|
||||
allNormalHint: '未发现明显问题区域，可进行日常舒缓养护',
|
||||
regionTitle: '分区分析',
|
||||
recommendTitle: '推荐护理',
|
||||
noProblem: '未见明显倾向',
|
||||
@@ -19,12 +22,11 @@ module.exports = {
|
||||
pigment: '色素 / 暗黄',
|
||||
deep: '深层循环 / 疲劳'
|
||||
},
|
||||
regionNames: {
|
||||
right: '右脸',
|
||||
left: '左脸',
|
||||
top: '额头',
|
||||
middle: '鼻区',
|
||||
bottom: '下巴'
|
||||
modeNames: {
|
||||
red: '嫩肤焕亮',
|
||||
ir: '深层焕活',
|
||||
uv: '净痘控油',
|
||||
yellow: '匀净提亮'
|
||||
}
|
||||
},
|
||||
en: {
|
||||
@@ -32,6 +34,9 @@ module.exports = {
|
||||
subtitle: 'Skin-tendency reference from multispectral reflection',
|
||||
scannedAt: 'Scanned at',
|
||||
overallTitle: 'Overall Tendency',
|
||||
faceTitle: 'Zone Care Map',
|
||||
faceTapHint: 'Tap a zone to learn about its light',
|
||||
allNormalHint: 'No notable concerns found — a gentle daily care session works well',
|
||||
regionTitle: 'Zone Analysis',
|
||||
recommendTitle: 'Recommended Care',
|
||||
noProblem: 'No notable tendency',
|
||||
@@ -46,12 +51,11 @@ module.exports = {
|
||||
pigment: 'Pigment / Sallowness',
|
||||
deep: 'Deep circulation / Fatigue'
|
||||
},
|
||||
regionNames: {
|
||||
right: 'Right cheek',
|
||||
left: 'Left cheek',
|
||||
top: 'Forehead',
|
||||
middle: 'Nose',
|
||||
bottom: 'Chin'
|
||||
modeNames: {
|
||||
red: 'Glow & Firm',
|
||||
ir: 'Deep Revive',
|
||||
uv: 'Clear & Balance',
|
||||
yellow: 'Even & Brighten'
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -7,8 +7,6 @@ module.exports = {
|
||||
smartMode: '✨ 智能模式',
|
||||
normalMode: '🔄 普通模式',
|
||||
allRegions: '全区域',
|
||||
regionTopLeft: '左上区',
|
||||
regionTopRight: '右上区',
|
||||
relax1: '请放松心情',
|
||||
relax2: '享受美好时光',
|
||||
stopBtn: '停止使用',
|
||||
@@ -35,8 +33,6 @@ module.exports = {
|
||||
smartMode: '✨ Smart Mode',
|
||||
normalMode: '🔄 Normal Mode',
|
||||
allRegions: 'All regions',
|
||||
regionTopLeft: 'Top-left',
|
||||
regionTopRight: 'Top-right',
|
||||
relax1: 'Relax and unwind',
|
||||
relax2: 'Enjoy your moment',
|
||||
stopBtn: 'Stop',
|
||||
|
||||
@@ -51,7 +51,8 @@ Page({
|
||||
return
|
||||
}
|
||||
|
||||
self._pdSum = [0, 0, 0, 0, 0, 0, 0]
|
||||
// 按扫描光色分桶累加（FFE4 Byte17 高三位，新协议）。旧固件无标识 → 全部归 red 桶。
|
||||
self._buckets = {}
|
||||
self._frameCount = 0
|
||||
self._completed = false
|
||||
self._collecting = false
|
||||
@@ -81,6 +82,15 @@ Page({
|
||||
self._lastRunState = data.run_state
|
||||
}
|
||||
|
||||
// 设备故障(Byte18=0xFF)：立即中止，不等 3 分钟超时
|
||||
if (data.run_state === 0xFF) {
|
||||
console.error('[SCAN] 设备故障，中止扫描')
|
||||
self._completed = true
|
||||
self._cleanup()
|
||||
self.setData({ phase: 'ready', error: i18n.t('autoScan.deviceFault') })
|
||||
return
|
||||
}
|
||||
|
||||
if (data.run_state === 1) {
|
||||
self._seenRunState1 = true
|
||||
}
|
||||
@@ -110,10 +120,17 @@ Page({
|
||||
if (self._completed || !self._collecting) return
|
||||
if (!data || !data.pd || data.pd.length < 7) return
|
||||
|
||||
self._frameCount++
|
||||
for (var i = 0; i < 7; i++) {
|
||||
self._pdSum[i] += data.pd[i]
|
||||
var wave = data.scan_wave || 'red' // 旧固件帧无光色标识，按单波长红光兼容
|
||||
var bucket = self._buckets[wave]
|
||||
if (!bucket) {
|
||||
bucket = { sum: [0, 0, 0, 0, 0, 0, 0], n: 0 }
|
||||
self._buckets[wave] = bucket
|
||||
}
|
||||
bucket.n++
|
||||
for (var i = 0; i < 7; i++) {
|
||||
bucket.sum[i] += data.pd[i]
|
||||
}
|
||||
self._frameCount++
|
||||
self.setData({
|
||||
frameCount: self._frameCount,
|
||||
vbat: data.vbat || self.data.vbat,
|
||||
@@ -155,28 +172,35 @@ Page({
|
||||
this._completed = true
|
||||
this._cleanup()
|
||||
|
||||
// 每个光色桶各自求平均 → waves: { red:[7], ir:[7], uv:[7], yellow:[7] }（有几色算几色）
|
||||
var waves = {}
|
||||
var firstAvg = []
|
||||
for (var wave in this._buckets) {
|
||||
if (!this._buckets.hasOwnProperty(wave)) continue
|
||||
var b = this._buckets[wave]
|
||||
if (!b.n) continue
|
||||
var avg = []
|
||||
var count = this._frameCount || 1
|
||||
for (var i = 0; i < 7; i++) {
|
||||
avg.push(Math.round(this._pdSum[i] / count))
|
||||
for (var i = 0; i < 7; i++) avg.push(Math.round(b.sum[i] / b.n))
|
||||
waves[wave] = avg
|
||||
if (!firstAvg.length) firstAvg = avg
|
||||
}
|
||||
|
||||
this.setData({ phase: 'done', pdAvg: avg, frameCount: count })
|
||||
getApp().globalData.lastScanPdAvg = avg
|
||||
console.log('[SCAN] PD平均值:', avg, '帧数:', count)
|
||||
this.setData({ phase: 'done', pdAvg: firstAvg, frameCount: this._frameCount })
|
||||
getApp().globalData.lastScanPdAvg = firstAvg
|
||||
console.log('[SCAN] 分桶结果:', JSON.stringify(Object.keys(waves).map(function (k) { return k })), '总帧数:', this._frameCount)
|
||||
|
||||
this._buildAndGoReport(avg)
|
||||
this._buildAndGoReport(waves)
|
||||
},
|
||||
|
||||
// Scan finished -> run the (placeholder) diagnosis, store + persist a report, and
|
||||
// navigate to the report page so the user sees their skin tendencies and chooses
|
||||
// care. This replaces the previous auto-start-treatment behavior.
|
||||
//
|
||||
// NOTE: today only single-wavelength red PD is collected, and the thresholds +
|
||||
// PD->region mapping in services/diagnosis.js are placeholders pending calibration.
|
||||
// Report + persistence work end to end regardless; the numbers get real after
|
||||
// 4-wavelength scan collection and calibration land.
|
||||
_buildAndGoReport: function (avg) {
|
||||
// NOTE: thresholds + PD->region mapping in services/diagnosis.js are placeholders
|
||||
// pending hardware confirmation / calibration (tunable via server diagnosis_config).
|
||||
// Old firmware sends no wave marker -> everything lands in the red bucket and the
|
||||
// pipeline degrades to single-wavelength gracefully.
|
||||
_buildAndGoReport: function (waves) {
|
||||
var self = this
|
||||
var app = getApp()
|
||||
var mask = self.data.regions || 0x1F
|
||||
@@ -185,7 +209,7 @@ Page({
|
||||
var scannedAt = Date.now()
|
||||
|
||||
function proceed(config) {
|
||||
var scanData = diagnosis.fromRedScan(avg, mask, deviceId, scannedAt)
|
||||
var scanData = diagnosis.buildScanData(waves, mask, deviceId, scannedAt)
|
||||
var report = diagnosis.analyze(scanData, config || diagnosis.DEFAULT_CONFIG)
|
||||
app.globalData.lastScanReport = report
|
||||
|
||||
@@ -205,7 +229,9 @@ Page({
|
||||
}
|
||||
|
||||
api.getDiagnosisConfig().then(function (cfg) {
|
||||
proceed(cfg && cfg.levels ? cfg : diagnosis.DEFAULT_CONFIG)
|
||||
// 非空对象即采用——缺失字段由 analyze 逐项回退 DEFAULT；只发部分字段(如仅调 pd_region_map)也生效
|
||||
var usable = cfg && typeof cfg === 'object' && Object.keys(cfg).length > 0
|
||||
proceed(usable ? cfg : diagnosis.DEFAULT_CONFIG)
|
||||
}).catch(function () {
|
||||
proceed(diagnosis.DEFAULT_CONFIG)
|
||||
})
|
||||
|
||||
@@ -15,9 +15,12 @@ Page({
|
||||
modeColors: ['#E8503A', '#7C4DFF', '#F5B841', '#8B2E3C', '#F08AA8']
|
||||
},
|
||||
|
||||
onLoad: function () {
|
||||
onLoad: function (options) {
|
||||
var app = getApp()
|
||||
this.setData({ statusBarHeight: app.globalData.statusBarHeight })
|
||||
// 报告页分区跳转带 ?wave=red|ir|uv|yellow，高亮对应光卡片（'ir' 对应本页 key 'infrared'）
|
||||
var focus = (options && options.wave) || ''
|
||||
if (focus === 'ir') focus = 'infrared'
|
||||
this.setData({ statusBarHeight: app.globalData.statusBarHeight, focusWave: focus })
|
||||
},
|
||||
|
||||
onShow: function () {
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
<view class="page-content">
|
||||
<!-- 四种光 -->
|
||||
<view class="section-title">{{i18n.lightInfo.lightsSectionTitle}}</view>
|
||||
<view class="light-card" wx:for="{{lights}}" wx:key="key">
|
||||
<view class="light-card {{focusWave === item.key ? 'light-card-focus' : ''}}" wx:for="{{lights}}" wx:key="key">
|
||||
<view class="light-card-top">
|
||||
<view class="swatch" style="background: {{item.color}};"></view>
|
||||
<view class="light-head">
|
||||
|
||||
@@ -123,3 +123,9 @@
|
||||
line-height: 1.6;
|
||||
text-align: center;
|
||||
}
|
||||
|
||||
/* 从扫描报告分区跳转时高亮对应光 */
|
||||
.light-card-focus {
|
||||
border: 2rpx solid rgba(60, 60, 60, 0.35);
|
||||
box-shadow: 0 6rpx 20rpx rgba(0, 0, 0, 0.10);
|
||||
}
|
||||
|
||||
@@ -23,13 +23,13 @@ Page({
|
||||
],
|
||||
selectedFunctionId: 'rejuvenate',
|
||||
selectedWavelength: 2,
|
||||
// region mask mapping identical to treatment-setup: 右=0x01 左=0x02 上=0x04 中=0x08 下=0x10
|
||||
// 掩码 = IO 纵列布局（与 treatment-setup 一致）：左=0x01 中上=0x02 中=0x04 中下=0x08 右=0x10
|
||||
regions: [
|
||||
{ key: 'right', mask: 0x01, checked: true },
|
||||
{ key: 'left', mask: 0x02, checked: true },
|
||||
{ key: 'top', mask: 0x04, checked: true },
|
||||
{ key: 'middle', mask: 0x08, checked: true },
|
||||
{ key: 'bottom', mask: 0x10, checked: true }
|
||||
{ key: 'left', mask: 0x01, checked: true },
|
||||
{ key: 'top', mask: 0x02, checked: true },
|
||||
{ key: 'middle', mask: 0x04, checked: true },
|
||||
{ key: 'bottom', mask: 0x08, checked: true },
|
||||
{ key: 'right', mask: 0x10, checked: true }
|
||||
],
|
||||
// safety: a single session must NOT exceed 10 minutes (hardware caps at 10).
|
||||
durations: [5, 10],
|
||||
|
||||
@@ -3,7 +3,8 @@ var ble = require('../../services/ble')
|
||||
var diagnosis = require('../../services/diagnosis')
|
||||
var i18n = require('../../i18n/index')
|
||||
|
||||
var WAVE_CODE_KEY = { 1: 'infrared', 2: 'red', 3: 'uv', 4: 'yellow' }
|
||||
// diagnosis 的 wave key ('ir') 与 common.wavelengths 的 key ('infrared') 不同名，需映射
|
||||
var WAVE_COMMON_KEY = { red: 'red', ir: 'infrared', uv: 'uv', yellow: 'yellow' }
|
||||
|
||||
function pad2(n) { return (n < 10 ? '0' : '') + n }
|
||||
|
||||
@@ -24,6 +25,7 @@ Page({
|
||||
overallList: [],
|
||||
regionList: [],
|
||||
recommendList: [],
|
||||
faceZones: [],
|
||||
starting: false,
|
||||
error: ''
|
||||
},
|
||||
@@ -111,9 +113,16 @@ Page({
|
||||
return { label: d.problems[o.type] || o.type, level: o.level, levelLabel: levelLabel(o.level) }
|
||||
})
|
||||
|
||||
function regionName(key) {
|
||||
return (common.regions && common.regions[key]) || key
|
||||
}
|
||||
function modeName(waveKey) {
|
||||
return (d.modeNames && d.modeNames[waveKey]) || ''
|
||||
}
|
||||
|
||||
var regionList = (report.regions || []).map(function (r) {
|
||||
return {
|
||||
name: d.regionNames[r.region] || r.region,
|
||||
name: regionName(r.region),
|
||||
level: r.level,
|
||||
levelLabel: levelLabel(r.level),
|
||||
problemLabel: r.top_problem ? (d.problems[r.top_problem] || r.top_problem) : d.noProblem,
|
||||
@@ -121,22 +130,34 @@ Page({
|
||||
}
|
||||
})
|
||||
|
||||
var defs = diagnosis.REGION_DEFS
|
||||
// 推荐护理：现在 recommend_plan 每区一条(可不同色)，一条 BLE 命令可全部下发
|
||||
var recommendList = (report.recommend_plan || []).map(function (p) {
|
||||
var names = []
|
||||
for (var i = 0; i < defs.length; i++) {
|
||||
if (p.mask & defs[i].mask) names.push(d.regionNames[defs[i].key] || defs[i].key)
|
||||
}
|
||||
var waveKey = WAVE_CODE_KEY[p.wavelength]
|
||||
return {
|
||||
label: d.problems[p.label_key] || '',
|
||||
wavelengthLabel: (waveKey && common.wavelengths[waveKey]) || '',
|
||||
regionsLabel: names.join('、'),
|
||||
wavelength: p.wavelength,
|
||||
modeLabel: modeName(p.wave),
|
||||
wavelengthLabel: common.wavelengths[WAVE_COMMON_KEY[p.wave]] || '',
|
||||
regionsLabel: regionName(p.region),
|
||||
levelLabel: levelLabel(p.level),
|
||||
mask: p.mask
|
||||
}
|
||||
})
|
||||
|
||||
// 面罩示意图数据（固定 5 区，未扫描/无问题的区置灰）
|
||||
var byKey = {}
|
||||
;(report.regions || []).forEach(function (r) { byKey[r.region] = r })
|
||||
var faceZones = diagnosis.REGION_DEFS.map(function (def) {
|
||||
var r = byKey[def.key]
|
||||
var hasProblem = !!(r && r.top_problem && r.wave)
|
||||
return {
|
||||
key: def.key,
|
||||
waveKey: hasProblem ? r.wave : null,
|
||||
name: regionName(def.key),
|
||||
hasProblem: hasProblem,
|
||||
modeLabel: hasProblem ? modeName(r.wave) : '',
|
||||
levelLabel: hasProblem ? levelLabel(r.level) : '',
|
||||
colorClass: hasProblem ? 'zone-' + r.wave : 'zone-none'
|
||||
}
|
||||
})
|
||||
|
||||
this._report = report
|
||||
this.setData({
|
||||
loading: false,
|
||||
@@ -146,26 +167,37 @@ Page({
|
||||
overallList: overallList,
|
||||
regionList: regionList,
|
||||
recommendList: recommendList,
|
||||
faceZones: faceZones,
|
||||
error: ''
|
||||
})
|
||||
},
|
||||
|
||||
onTapZone: function (e) {
|
||||
var wave = e.currentTarget.dataset.wave
|
||||
wx.navigateTo({ url: '/pages/light-info/light-info' + (wave ? '?wave=' + wave : '') })
|
||||
},
|
||||
|
||||
onStartRecommend: function () {
|
||||
var self = this
|
||||
var report = self._report || {}
|
||||
var plan = report.recommend_plan || []
|
||||
if (!ble.isConnected()) {
|
||||
self.setData({ error: i18n.t('common.deviceNotConnected') })
|
||||
return
|
||||
}
|
||||
var plan = (report.recommend_plan && report.recommend_plan[0]) || null
|
||||
var mask = plan ? plan.mask : (report.recommend_mask || 0x1F)
|
||||
var wl = plan ? plan.wavelength : 2
|
||||
if (!mask) mask = 0x1F
|
||||
if (!plan.length) return
|
||||
|
||||
// 一条 33B 命令携带全部分区差异化方案（每区各自的光色，亮度来自 diagnosis config，默认 204=80%）
|
||||
var mask = report.recommend_mask || 0
|
||||
var wl = plan[0].wavelength || 2 // treating 页展示用（多色场景显示首个）
|
||||
|
||||
self.setData({ starting: true, error: '' })
|
||||
ble.setParams({
|
||||
region_mask: mask, wavelength: wl, brightness: 140,
|
||||
duration_ms: 600000, mode: 1, control: 0x02
|
||||
plan: plan.map(function (p) {
|
||||
return { mask: p.mask, wave: p.wave, brightness: p.brightness }
|
||||
}),
|
||||
duration_ms: 600000,
|
||||
control: 0x02
|
||||
}).then(function () {
|
||||
return ble.startTreatment(mask)
|
||||
}).then(function () {
|
||||
|
||||
@@ -30,6 +30,64 @@
|
||||
<view class="empty-hint" wx:else>{{i18n.report.noProblem}}</view>
|
||||
</view>
|
||||
|
||||
<!-- Face zones -->
|
||||
<view class="card">
|
||||
<view class="card-title">{{i18n.report.faceTitle}}</view>
|
||||
<view class="face-map">
|
||||
<view class="face-col face-col-side">
|
||||
<view class="face-zone {{faceZones[0].colorClass}}" bindtap="onTapZone" data-wave="{{faceZones[0].waveKey}}">
|
||||
<text class="face-zone-name">{{faceZones[0].name}}</text>
|
||||
<text class="face-zone-mode" wx:if="{{faceZones[0].hasProblem}}">{{faceZones[0].modeLabel}}</text>
|
||||
<text class="face-zone-level" wx:if="{{faceZones[0].hasProblem}}">{{faceZones[0].levelLabel}}</text>
|
||||
</view>
|
||||
</view>
|
||||
<view class="face-col face-col-mid">
|
||||
<view class="face-zone {{faceZones[1].colorClass}}" bindtap="onTapZone" data-wave="{{faceZones[1].waveKey}}">
|
||||
<text class="face-zone-name">{{faceZones[1].name}}</text>
|
||||
<text class="face-zone-mode" wx:if="{{faceZones[1].hasProblem}}">{{faceZones[1].modeLabel}}</text>
|
||||
<text class="face-zone-level" wx:if="{{faceZones[1].hasProblem}}">{{faceZones[1].levelLabel}}</text>
|
||||
</view>
|
||||
<view class="face-zone {{faceZones[2].colorClass}}" bindtap="onTapZone" data-wave="{{faceZones[2].waveKey}}">
|
||||
<text class="face-zone-name">{{faceZones[2].name}}</text>
|
||||
<text class="face-zone-mode" wx:if="{{faceZones[2].hasProblem}}">{{faceZones[2].modeLabel}}</text>
|
||||
<text class="face-zone-level" wx:if="{{faceZones[2].hasProblem}}">{{faceZones[2].levelLabel}}</text>
|
||||
</view>
|
||||
<view class="face-zone {{faceZones[3].colorClass}}" bindtap="onTapZone" data-wave="{{faceZones[3].waveKey}}">
|
||||
<text class="face-zone-name">{{faceZones[3].name}}</text>
|
||||
<text class="face-zone-mode" wx:if="{{faceZones[3].hasProblem}}">{{faceZones[3].modeLabel}}</text>
|
||||
<text class="face-zone-level" wx:if="{{faceZones[3].hasProblem}}">{{faceZones[3].levelLabel}}</text>
|
||||
</view>
|
||||
</view>
|
||||
<view class="face-col face-col-side">
|
||||
<view class="face-zone {{faceZones[4].colorClass}}" bindtap="onTapZone" data-wave="{{faceZones[4].waveKey}}">
|
||||
<text class="face-zone-name">{{faceZones[4].name}}</text>
|
||||
<text class="face-zone-mode" wx:if="{{faceZones[4].hasProblem}}">{{faceZones[4].modeLabel}}</text>
|
||||
<text class="face-zone-level" wx:if="{{faceZones[4].hasProblem}}">{{faceZones[4].levelLabel}}</text>
|
||||
</view>
|
||||
</view>
|
||||
</view>
|
||||
<view class="face-legend">
|
||||
<view class="legend-item">
|
||||
<view class="legend-dot zone-red"></view>
|
||||
<text class="legend-label">{{i18n.report.modeNames.red}}</text>
|
||||
</view>
|
||||
<view class="legend-item">
|
||||
<view class="legend-dot zone-ir"></view>
|
||||
<text class="legend-label">{{i18n.report.modeNames.ir}}</text>
|
||||
</view>
|
||||
<view class="legend-item">
|
||||
<view class="legend-dot zone-uv"></view>
|
||||
<text class="legend-label">{{i18n.report.modeNames.uv}}</text>
|
||||
</view>
|
||||
<view class="legend-item">
|
||||
<view class="legend-dot zone-yellow"></view>
|
||||
<text class="legend-label">{{i18n.report.modeNames.yellow}}</text>
|
||||
</view>
|
||||
</view>
|
||||
<view class="face-tap-hint">{{i18n.report.faceTapHint}}</view>
|
||||
<view class="face-all-normal-hint" wx:if="{{!hasProblem}}">{{i18n.report.allNormalHint}}</view>
|
||||
</view>
|
||||
|
||||
<!-- Per-region -->
|
||||
<view class="card">
|
||||
<view class="card-title">{{i18n.report.regionTitle}}</view>
|
||||
@@ -48,7 +106,7 @@
|
||||
<view class="rec-row" wx:for="{{recommendList}}" wx:key="mask">
|
||||
<view class="rec-dot"></view>
|
||||
<view class="rec-body">
|
||||
<text class="rec-label">{{item.label}}</text>
|
||||
<text class="rec-label">{{item.modeLabel}}</text>
|
||||
<text class="rec-meta">{{item.wavelengthLabel}} · {{item.regionsLabel}}</text>
|
||||
</view>
|
||||
</view>
|
||||
|
||||
@@ -60,6 +60,73 @@
|
||||
|
||||
.empty-hint { color: #999; font-size: 26rpx; }
|
||||
|
||||
.face-map {
|
||||
display: flex;
|
||||
height: 480rpx;
|
||||
gap: 8rpx;
|
||||
padding: 12rpx;
|
||||
box-sizing: border-box;
|
||||
background: #FAFAFA;
|
||||
border-radius: 32rpx;
|
||||
}
|
||||
.face-col { display: flex; flex-direction: column; flex: 1; gap: 8rpx; }
|
||||
.face-col-mid { flex: 1.15; }
|
||||
.face-zone {
|
||||
flex: 1;
|
||||
display: flex;
|
||||
flex-direction: column;
|
||||
align-items: center;
|
||||
justify-content: center;
|
||||
border-radius: 20rpx;
|
||||
border: 2rpx solid transparent;
|
||||
padding: 8rpx;
|
||||
box-sizing: border-box;
|
||||
transition: transform 0.1s ease;
|
||||
}
|
||||
.face-col-side .face-zone { border-radius: 28rpx; }
|
||||
.face-zone:active { transform: scale(0.96); }
|
||||
.face-zone-name { font-size: 26rpx; font-weight: 600; }
|
||||
.face-zone-mode { font-size: 22rpx; margin-top: 6rpx; }
|
||||
.face-zone-level { font-size: 20rpx; margin-top: 2rpx; opacity: 0.85; }
|
||||
|
||||
.zone-red {
|
||||
background: rgba(232, 93, 93, 0.14);
|
||||
border-color: rgba(232, 93, 93, 0.4);
|
||||
color: #B23C3C;
|
||||
}
|
||||
.zone-ir {
|
||||
background: rgba(192, 107, 74, 0.14);
|
||||
border-color: rgba(192, 107, 74, 0.4);
|
||||
color: #8C4A2E;
|
||||
}
|
||||
.zone-uv {
|
||||
background: rgba(142, 107, 216, 0.14);
|
||||
border-color: rgba(142, 107, 216, 0.4);
|
||||
color: #5F3FAE;
|
||||
}
|
||||
.zone-yellow {
|
||||
background: rgba(232, 185, 61, 0.18);
|
||||
border-color: rgba(232, 185, 61, 0.45);
|
||||
color: #8A6A10;
|
||||
}
|
||||
.zone-none {
|
||||
background: #F0F0F0;
|
||||
border-color: #E5E5E5;
|
||||
color: #999;
|
||||
}
|
||||
|
||||
.face-legend { display: flex; flex-wrap: wrap; margin-top: 20rpx; }
|
||||
.legend-item { display: flex; align-items: center; margin: 0 20rpx 10rpx 0; }
|
||||
.legend-dot { width: 16rpx; height: 16rpx; border-radius: 50%; margin-right: 8rpx; }
|
||||
.legend-dot.zone-red { background: #E85D5D; border: none; }
|
||||
.legend-dot.zone-ir { background: #C06B4A; border: none; }
|
||||
.legend-dot.zone-uv { background: #8E6BD8; border: none; }
|
||||
.legend-dot.zone-yellow { background: #E8B93D; border: none; }
|
||||
.legend-label { font-size: 22rpx; color: #666; }
|
||||
|
||||
.face-tap-hint { font-size: 22rpx; color: #bbb; margin-top: 14rpx; text-align: center; }
|
||||
.face-all-normal-hint { font-size: 24rpx; color: #6BBF59; text-align: center; margin-top: 12rpx; }
|
||||
|
||||
.region-row {
|
||||
display: flex;
|
||||
align-items: center;
|
||||
|
||||
@@ -23,16 +23,15 @@ Page({
|
||||
},
|
||||
|
||||
_getRegionText: function (regionMask) {
|
||||
// 掩码 = IO 纵列布局：0x01左 0x02中上 0x04中 0x08中下 0x10右
|
||||
var REGION_MAP = {
|
||||
1: 'common.regions.right',
|
||||
2: 'common.regions.left',
|
||||
4: 'common.regions.top',
|
||||
8: 'common.regions.middle',
|
||||
16: 'common.regions.bottom',
|
||||
32: 'treating.regionTopLeft',
|
||||
64: 'treating.regionTopRight'
|
||||
1: 'common.regions.left',
|
||||
2: 'common.regions.top',
|
||||
4: 'common.regions.middle',
|
||||
8: 'common.regions.bottom',
|
||||
16: 'common.regions.right'
|
||||
}
|
||||
if (regionMask === 0x7F) return i18n.t('treating.allRegions')
|
||||
if (regionMask === 0x1F) return i18n.t('treating.allRegions')
|
||||
var names = []
|
||||
for (var bit in REGION_MAP) {
|
||||
if (regionMask & parseInt(bit)) names.push(i18n.t(REGION_MAP[bit]))
|
||||
@@ -48,7 +47,7 @@ Page({
|
||||
var app = getApp()
|
||||
this.setData({ statusBarHeight: app.globalData.statusBarHeight })
|
||||
this._deviceId = ble.getDeviceId() || (app.globalData.currentDevice && app.globalData.currentDevice.device_id) || ''
|
||||
var regions = parseInt(options.regions) || 0x7F
|
||||
var regions = parseInt(options.regions) || 0x1F
|
||||
this.setData({
|
||||
regions: regions,
|
||||
wavelength: parseInt(options.wavelength) || 2,
|
||||
|
||||
@@ -34,7 +34,8 @@ Page({
|
||||
var app = getApp()
|
||||
this.setData({ statusBarHeight: app.globalData.statusBarHeight })
|
||||
i18n.bind(this)
|
||||
var regionKeys = ['right', 'left', 'top', 'middle', 'bottom']
|
||||
// 顺序对应 data.regions 的掩码 0x01..0x10（IO1..IO5 = 左/中上/中/中下/右）
|
||||
var regionKeys = ['left', 'top', 'middle', 'bottom', 'right']
|
||||
var regions = this.data.regions
|
||||
regions.forEach(function (r, i) {
|
||||
r.name = i18n.t('common.regions.' + regionKeys[i])
|
||||
|
||||
@@ -99,7 +99,7 @@ function handleValueChange(res) {
|
||||
console.warn('[BLE] ADC checksum mismatch, dropping')
|
||||
return
|
||||
}
|
||||
emit('adc', { pd: parsed.pd, vbat: vbatMv, battery: batteryPct, fitting: parsed.fitting, run_state: parsed.run_state })
|
||||
emit('adc', { pd: parsed.pd, vbat: vbatMv, battery: batteryPct, fitting: parsed.fitting, scan_wave: parsed.scan_wave, run_state: parsed.run_state, is_fault: parsed.is_fault })
|
||||
emit('battery', { battery: batteryPct, vbat: vbatMv })
|
||||
emit('fitting', { fitting: parsed.fitting })
|
||||
emit('run_state', { run_state: parsed.run_state })
|
||||
|
||||
@@ -57,18 +57,23 @@ var TREAT_MODE = {
|
||||
SMART: 1
|
||||
}
|
||||
|
||||
// 区域 = IO 纵列布局（果果 2026-07 定案）：左=IO1(0x01)，中上=IO2(0x02)，中=IO3(0x04)，
|
||||
// 中下=IO4(0x08)，右=IO5(0x10)。旧命名(左脸颊/额头/鼻部…)来自过时文档，与实物不符，已废弃。
|
||||
var REGION = {
|
||||
LEFT_CHEEK: 0x01,
|
||||
RIGHT_CHEEK: 0x02,
|
||||
FOREHEAD: 0x04,
|
||||
CHIN: 0x08,
|
||||
NOSE: 0x10,
|
||||
LEFT_EYE: 0x20,
|
||||
RIGHT_EYE: 0x40,
|
||||
FULL_FACE: 0x7F
|
||||
LEFT: 0x01,
|
||||
TOP: 0x02,
|
||||
MIDDLE: 0x04,
|
||||
BOTTOM: 0x08,
|
||||
RIGHT: 0x10,
|
||||
FULL_FACE: 0x1F
|
||||
}
|
||||
|
||||
var REGION_NAMES = ['left_cheek', 'right_cheek', 'forehead', 'chin', 'nose', 'left_eye', 'right_eye']
|
||||
var REGION_NAMES = ['left', 'top', 'middle', 'bottom', 'right']
|
||||
|
||||
// FFE4 Byte17 高三位 = 扫描时光色指示（协议简述-添加扫描时光色.docx 2026-07）：
|
||||
// 001=红光 010=红外 011=紫外(蓝) 100=暖黄。注意与下发命令的 WAVELENGTH 编码
|
||||
// (IR=1,R=2,UV=3,Y=4) 不同——1/2 正好是红与红外互换，绝不能复用那套常量。
|
||||
var SCAN_WAVE_KEY = { 1: 'red', 2: 'ir', 3: 'uv', 4: 'yellow' }
|
||||
|
||||
var DEVICE_ERR = {
|
||||
0x00: 'SUCCESS',
|
||||
@@ -167,26 +172,52 @@ var CONTROL = {
|
||||
TREAT: 0x02
|
||||
}
|
||||
|
||||
// 每 IO 6 字节，颜色格顺序 [红][红外][紫外][暖黄]（厂商原表，新版协议简述再次确认）。
|
||||
// 两种调用方式：
|
||||
// 单色广播（旧）：{ region_mask, wavelength(编码), brightness, ... }
|
||||
// 分区差异化（新）：{ plan: [{ mask, wave:'red'|'ir'|'uv'|'yellow', brightness }], hold_time, control }
|
||||
// —— 同一条命令里不同区可用不同颜色不同亮度（协议本身就支持 5 IO × 4 色独立）。
|
||||
var WAVE_BYTE_OFFSET = { red: 0, ir: 1, uv: 2, yellow: 3 }
|
||||
|
||||
// 安全包线（builder 层硬上限，纵深防御——即使服务端 diagnosis_config 误配也不可突破）：
|
||||
// 治疗亮度 ≤204(80%)，单次时长 ≤600s(10min)。固件侧安全机制大多未实现，此处是最后防线。
|
||||
var MAX_TREAT_BRIGHTNESS = 204
|
||||
var MAX_HOLD_SECONDS = 600
|
||||
|
||||
function buildVendorCommand(options) {
|
||||
options = options || {}
|
||||
var regionMask = options.region_mask || REGION.FULL_FACE
|
||||
var wavelength = options.wavelength || WAVELENGTH.R
|
||||
var brightness = clampByte(options.brightness === undefined ? 200 : options.brightness)
|
||||
var gain = clampUInt16(options.current_gain === undefined ? 0 : options.current_gain)
|
||||
var durationMs = options.duration_ms || 600000
|
||||
var holdSeconds = clampUInt16(options.hold_time === undefined ? Math.round(durationMs / 1000) : options.hold_time)
|
||||
var control = options.control !== undefined ? options.control : CONTROL.TREAT
|
||||
var regions = [
|
||||
REGION.LEFT_CHEEK,
|
||||
REGION.RIGHT_CHEEK,
|
||||
REGION.FOREHEAD,
|
||||
REGION.CHIN,
|
||||
REGION.NOSE
|
||||
]
|
||||
if (holdSeconds > MAX_HOLD_SECONDS) holdSeconds = MAX_HOLD_SECONDS
|
||||
var isTreat = control === CONTROL.TREAT
|
||||
function clampTreat(b) {
|
||||
b = clampByte(b)
|
||||
return isTreat && b > MAX_TREAT_BRIGHTNESS ? MAX_TREAT_BRIGHTNESS : b
|
||||
}
|
||||
var ioMasks = [REGION.LEFT, REGION.TOP, REGION.MIDDLE, REGION.BOTTOM, REGION.RIGHT] // IO1..IO5
|
||||
var bytes = []
|
||||
var i, j
|
||||
|
||||
for (var i = 0; i < regions.length; i++) {
|
||||
var enabled = (regionMask & regions[i]) !== 0
|
||||
if (options.plan && options.plan.length) {
|
||||
for (i = 0; i < ioMasks.length; i++) {
|
||||
var slot = [0, 0, 0, 0]
|
||||
for (j = 0; j < options.plan.length; j++) {
|
||||
var p = options.plan[j]
|
||||
if ((p.mask & ioMasks[i]) === 0) continue
|
||||
var off = WAVE_BYTE_OFFSET[p.wave]
|
||||
if (off === undefined) continue
|
||||
slot[off] = clampTreat(p.brightness === undefined ? 200 : p.brightness)
|
||||
}
|
||||
bytes.push(slot[0], slot[1], slot[2], slot[3], (gain >> 8) & 0xFF, gain & 0xFF)
|
||||
}
|
||||
} else {
|
||||
var regionMask = options.region_mask || REGION.FULL_FACE
|
||||
var wavelength = options.wavelength || WAVELENGTH.R
|
||||
var brightness = clampTreat(options.brightness === undefined ? 200 : options.brightness)
|
||||
for (i = 0; i < ioMasks.length; i++) {
|
||||
var enabled = (regionMask & ioMasks[i]) !== 0
|
||||
var red = 0
|
||||
var infrared = 0
|
||||
var uv = 0
|
||||
@@ -199,6 +230,7 @@ function buildVendorCommand(options) {
|
||||
}
|
||||
bytes.push(red, infrared, uv, warmYellow, (gain >> 8) & 0xFF, gain & 0xFF)
|
||||
}
|
||||
}
|
||||
|
||||
bytes.push((holdSeconds >> 8) & 0xFF, holdSeconds & 0xFF)
|
||||
bytes.push(control & 0xFF)
|
||||
@@ -217,13 +249,18 @@ function parseVendorStatus(buffer) {
|
||||
for (var p = 0; p < 7; p++) {
|
||||
pds19.push(bytes[p * 2] | (bytes[p * 2 + 1] << 8))
|
||||
}
|
||||
// Byte17 复用：低位=贴合状态(0/1)，高三位=扫描时光色指示（0 表示无标识/非扫描态或旧固件）。
|
||||
// Byte18 运行状态：0=IDLE 1=检测 2=治疗 0xFF=故障。
|
||||
var scanWaveCode = (bytes[16] >> 5) & 0x07
|
||||
return {
|
||||
type: 'adc',
|
||||
is_heartbeat: false,
|
||||
pd: pds19,
|
||||
vbat: bytes[14] | (bytes[15] << 8),
|
||||
fitting: bytes[16],
|
||||
fitting: bytes[16] & 0x1F,
|
||||
scan_wave: SCAN_WAVE_KEY[scanWaveCode] || null,
|
||||
run_state: bytes[17],
|
||||
is_fault: bytes[17] === 0xFF,
|
||||
checksum_ok: checksum19 === bytes[18],
|
||||
raw_hex: bytesToHex(bytes)
|
||||
}
|
||||
@@ -326,11 +363,13 @@ function parseException(payload) {
|
||||
|
||||
// --- display helpers ---
|
||||
|
||||
// 掩码 = IO 纵列布局（与 REGION 常量一致）。注意：此处为硬编码中文（历史遗留，
|
||||
// history/treatment-done 在用）；新页面请改用 i18n common.regions.* 取标签。
|
||||
function getRegionName(mask) {
|
||||
var names = []
|
||||
var bits = [
|
||||
[0x01, '右区'], [0x02, '左区'], [0x04, '上区'],
|
||||
[0x08, '中区'], [0x10, '下区'], [0x20, '左上区'], [0x40, '右上区']
|
||||
[0x01, '左区'], [0x02, '中上区'], [0x04, '中区'],
|
||||
[0x08, '中下区'], [0x10, '右区']
|
||||
]
|
||||
for (var i = 0; i < bits.length; i++) {
|
||||
if (mask & bits[i][0]) names.push(bits[i][1])
|
||||
@@ -362,6 +401,7 @@ module.exports = {
|
||||
TREAT_MODE: TREAT_MODE,
|
||||
REGION: REGION,
|
||||
REGION_NAMES: REGION_NAMES,
|
||||
SCAN_WAVE_KEY: SCAN_WAVE_KEY,
|
||||
CONTROL: CONTROL,
|
||||
DEVICE_ERR: DEVICE_ERR,
|
||||
|
||||
|
||||
+152
-117
@@ -1,130 +1,165 @@
|
||||
// Skin-tendency diagnosis — FRAMEWORK / placeholder implementation.
|
||||
// Skin-tendency diagnosis — 按《扫描+护理完整流程.docx》7.1/7.2/7.3 +
|
||||
// 《协议简述-添加扫描时光色.docx》+ 果果 2026-07 定案实现。
|
||||
//
|
||||
// STATUS: the diagnosis 依据 is NOT yet calibrated (客户也认为"还只是概念").
|
||||
// This module defines the full data pipeline so the report UI + storage work end
|
||||
// to end today, but the thresholds and the PD->region mapping are PLACEHOLDERS to
|
||||
// be replaced after real-device calibration. It degrades gracefully when only
|
||||
// partial scan data (currently single-wavelength red) is available.
|
||||
// 核心链路：28 组 PD(4 波长×7 路) → 按 PD_REGION_MAP 聚合成 5 区 →
|
||||
// 每波长算 5 区平均当基准 → 吸收度 NR = 本区/基准 − 1 →
|
||||
// 每区取 4 个 NR 的最大者(argmax)，超过阈值 TH 才判定问题 → 该波长即该区治疗光色。
|
||||
//
|
||||
// Two things here need hardware/calibration confirmation before this is "real":
|
||||
// 1) PD_REGION_MAP — which of the 7 PDs feed which facial region (docs disagree).
|
||||
// 2) levels thresholds — normalized-absorption cutoffs per severity level.
|
||||
// Both can be overridden at runtime by the server-side diagnosis_config, so tuning
|
||||
// after calibration does NOT require an app release.
|
||||
// 极性（已由固件批注版文档坐实，新版协议简述再次确认"0x0FFF表示最低光照"）：
|
||||
// PD ADC 值越大 = 反射光越弱 = 皮肤吸收越多。故 NR = zone/avg − 1（吸收多→NR 高）。
|
||||
// config.polarity = 'direct' 可切回"值大=光强"的旧假设（备用开关，标定时救急）。
|
||||
//
|
||||
// 仍未确认（走 config 热调，勿写死）：
|
||||
// 1) PD_REGION_MAP —— 7 路 PD 与 5 区的物理对应，所有文档从未给出，当前为推测值。
|
||||
// 2) 3 路 PD 区的聚合 —— 文档 7.1 自相矛盾(几何平均 vs 取最小)，按更细的几何平均+3σ剔异常实现。
|
||||
// 所有阈值/亮度/映射均可被服务端 diagnosis_config 覆盖，标定后免发版调参。
|
||||
|
||||
// Problem type -> recommended care wavelength (IR=1, R=2, UV=3, Y=4).
|
||||
// 问题类型 -> 治疗波长编码（下发命令用：IR=1, R=2, UV=3, Y=4）。
|
||||
var PROBLEM_WAVELENGTH = { aging: 2, acne: 3, pigment: 4, deep: 1 }
|
||||
// Scanned wavelength code -> the problem it reveals (inverse of the above).
|
||||
var WAVELENGTH_PROBLEM = { 1: 'deep', 2: 'aging', 3: 'acne', 4: 'pigment' }
|
||||
// Dictionary wave-key -> wavelength code.
|
||||
// 波长 key -> 揭示的问题类型。
|
||||
var WAVE_PROBLEM = { red: 'aging', uv: 'acne', yellow: 'pigment', ir: 'deep' }
|
||||
// 波长 key -> 下发命令编码。
|
||||
var WAVE_KEY_CODE = { red: 2, uv: 3, yellow: 4, ir: 1 }
|
||||
|
||||
// 5 regions in the app's neutral convention (right/left/top/middle/bottom),
|
||||
// matching treatment-setup.js masks.
|
||||
// 5 区 = IO 纵列布局（果果定案）：左=IO1 中上=IO2 中=IO3 中下=IO4 右=IO5。
|
||||
var REGION_DEFS = [
|
||||
{ key: 'right', mask: 0x01 },
|
||||
{ key: 'left', mask: 0x02 },
|
||||
{ key: 'top', mask: 0x04 },
|
||||
{ key: 'middle', mask: 0x08 },
|
||||
{ key: 'bottom', mask: 0x10 }
|
||||
{ key: 'left', mask: 0x01 },
|
||||
{ key: 'top', mask: 0x02 },
|
||||
{ key: 'middle', mask: 0x04 },
|
||||
{ key: 'bottom', mask: 0x08 },
|
||||
{ key: 'right', mask: 0x10 }
|
||||
]
|
||||
|
||||
// PLACEHOLDER PD->region map. Flow doc: 7 PDs = 1 special region (3 PDs) + 4 regions
|
||||
// (1 PD each). The exact assignment is UNCONFIRMED — replace after hardware confirms
|
||||
// the PD physical layout. Each region lists the PD index(es) that feed its signal.
|
||||
var PD_REGION_MAP = {
|
||||
right: [0], left: [1], top: [2], middle: [3, 5, 6], bottom: [4]
|
||||
}
|
||||
|
||||
var MAX_ADC = 4095
|
||||
|
||||
var DEFAULT_CONFIG = {
|
||||
calibrated: false,
|
||||
levels: { low: 0.15, mid: 0.35, high: 0.55 },
|
||||
polarity: 'inverted', // inverted=值大吸收多(已确认) | direct=旧假设备用
|
||||
th: 0.10, // 判定阈值(文档建议初始值，需临床标定)
|
||||
severity: { low: 0.05, mid: 0.15, high: 0.30 }, // 轻/中/重分级，仅报告展示
|
||||
brightness: 204, // 治疗强度 80%(果果定案)，仅用于推荐方案下发
|
||||
// 推测映射：中区含 3 路 PD(文档"1 特殊区 3 路+4 普通区各 1 路")，待固件确认后改 config。
|
||||
pd_region_map: { left: [0], top: [1], middle: [2, 3, 4], bottom: [5], right: [6] },
|
||||
problem_wavelength: PROBLEM_WAVELENGTH
|
||||
}
|
||||
|
||||
function _avg(arr) {
|
||||
if (!arr || !arr.length) return 0
|
||||
var s = 0
|
||||
for (var i = 0; i < arr.length; i++) s += arr[i]
|
||||
return s / arr.length
|
||||
function _median(arr) {
|
||||
var s = arr.slice().sort(function (a, b) { return a - b })
|
||||
var m = Math.floor(s.length / 2)
|
||||
return s.length % 2 ? s[m] : (s[m - 1] + s[m]) / 2
|
||||
}
|
||||
|
||||
// Normalized absorption in [0,1]: the more the light is absorbed (lower reflected PD
|
||||
// relative to the底噪 baseline), the stronger the tendency signal.
|
||||
function _absorption(pdValue, baseline) {
|
||||
if (!baseline || baseline <= 0) return 0
|
||||
var a = (baseline - pdValue) / baseline
|
||||
if (a < 0) a = 0
|
||||
if (a > 1) a = 1
|
||||
return a
|
||||
// 区域有效值：1 路直接用；≥3 路按 7.1 节"几何平均 + 剔奇异值"（防黑痣/毛发单点失真）。
|
||||
// 剔异常用 MAD(中位数绝对偏差)而非文档字面的 3σ：n=3 时单个离群点会把标准差同步撑大，
|
||||
// 3σ 判据永不触发（审计实证 [900,9000,905] 不剔）；MAD 阈值 4.45×MAD ≈ 3σ 等效(3×1.4826)。
|
||||
function _aggregate(vals) {
|
||||
if (!vals.length) return 0
|
||||
if (vals.length === 1) return vals[0]
|
||||
var kept = vals
|
||||
if (vals.length >= 3) {
|
||||
var med = _median(vals)
|
||||
var devs = vals.map(function (v) { return Math.abs(v - med) })
|
||||
var mad = _median(devs)
|
||||
var thr = 4.45 * mad
|
||||
var filtered = vals.filter(function (v) { return Math.abs(v - med) <= thr })
|
||||
if (filtered.length >= 2) kept = filtered
|
||||
}
|
||||
var logSum = 0
|
||||
for (var i = 0; i < kept.length; i++) {
|
||||
if (kept[i] <= 0) return 0 // 有无效 0 值时该区数据不可信
|
||||
logSum += Math.log(kept[i])
|
||||
}
|
||||
return Math.exp(logSum / kept.length)
|
||||
}
|
||||
|
||||
function _levelOf(score, levels) {
|
||||
if (score >= levels.high) return 3
|
||||
if (score >= levels.mid) return 2
|
||||
if (score >= levels.low) return 1
|
||||
function _severityLevel(nr, severity) {
|
||||
if (nr > severity.high) return 3
|
||||
if (nr > severity.mid) return 2
|
||||
if (nr > severity.low) return 1
|
||||
return 0
|
||||
}
|
||||
|
||||
// scanData: {
|
||||
// device_id, scanned_at,
|
||||
// region_mask, // which regions were scanned (default 0x1F)
|
||||
// noise: [7], // per-PD 底噪 baseline (optional; defaults MAX_ADC)
|
||||
// waves: { red:[7], uv:[7], yellow:[7], ir:[7] } // any subset; each = 7 PD values
|
||||
// region_mask, // 本次扫描选中的区域(默认 0x1F)
|
||||
// waves: { red:[7], ir:[7], uv:[7], yellow:[7] } // 任意子集；每项 = 7 路 PD ADC
|
||||
// }
|
||||
function analyze(scanData, config) {
|
||||
config = config || DEFAULT_CONFIG
|
||||
var levels = config.levels || DEFAULT_CONFIG.levels
|
||||
var th = config.th !== undefined ? config.th : DEFAULT_CONFIG.th
|
||||
var severity = config.severity || DEFAULT_CONFIG.severity
|
||||
var brightness = config.brightness || DEFAULT_CONFIG.brightness
|
||||
var pdMap = config.pd_region_map || DEFAULT_CONFIG.pd_region_map
|
||||
var problemWave = config.problem_wavelength || PROBLEM_WAVELENGTH
|
||||
var inverted = config.polarity !== 'direct'
|
||||
scanData = scanData || {}
|
||||
var waves = scanData.waves || {}
|
||||
var noise = scanData.noise
|
||||
var scannedMask = scanData.region_mask || 0x1F
|
||||
|
||||
// 1) 聚合：每波长 × 每选中区 → 区域有效值
|
||||
var zone = {} // zone[waveKey][regionKey] = 有效值
|
||||
var included = [] // 参与本次扫描的区域定义
|
||||
var r, def
|
||||
for (r = 0; r < REGION_DEFS.length; r++) {
|
||||
if ((scannedMask & REGION_DEFS[r].mask) !== 0) included.push(REGION_DEFS[r])
|
||||
}
|
||||
for (var wk in waves) {
|
||||
if (!waves.hasOwnProperty(wk) || !WAVE_PROBLEM[wk]) continue
|
||||
var pdArr = waves[wk]
|
||||
if (!pdArr || !pdArr.length) continue
|
||||
zone[wk] = {}
|
||||
for (r = 0; r < included.length; r++) {
|
||||
def = included[r]
|
||||
var idxs = pdMap[def.key] || []
|
||||
var vals = []
|
||||
for (var k = 0; k < idxs.length; k++) {
|
||||
var v = pdArr[idxs[k]]
|
||||
if (v !== undefined && v !== null && v > 0) vals.push(v)
|
||||
}
|
||||
if (vals.length) zone[wk][def.key] = _aggregate(vals)
|
||||
}
|
||||
}
|
||||
|
||||
// 2) 每波长的基准 = 该波长下各区有效值的平均（7.1：Avg_PD_X_AllZones）
|
||||
var avg = {}
|
||||
for (wk in zone) {
|
||||
if (!zone.hasOwnProperty(wk)) continue
|
||||
var sum = 0
|
||||
var n = 0
|
||||
for (r = 0; r < included.length; r++) {
|
||||
var zv = zone[wk][included[r].key]
|
||||
if (zv !== undefined) { sum += zv; n++ }
|
||||
}
|
||||
if (n > 0) avg[wk] = sum / n
|
||||
}
|
||||
|
||||
// 3) 吸收度 NR + 每区 argmax 判定
|
||||
var regions = []
|
||||
var overallAcc = {}
|
||||
|
||||
for (var r = 0; r < REGION_DEFS.length; r++) {
|
||||
var def = REGION_DEFS[r]
|
||||
if ((scannedMask & def.mask) === 0) continue
|
||||
var pdIdx = PD_REGION_MAP[def.key] || []
|
||||
var problems = []
|
||||
|
||||
for (var wk in waves) {
|
||||
if (!waves.hasOwnProperty(wk)) continue
|
||||
var code = WAVE_KEY_CODE[wk]
|
||||
var problemType = WAVELENGTH_PROBLEM[code]
|
||||
if (!problemType) continue
|
||||
|
||||
var pdVals = []
|
||||
var baseVals = []
|
||||
for (var k = 0; k < pdIdx.length; k++) {
|
||||
var idx = pdIdx[k]
|
||||
if (waves[wk][idx] !== undefined) pdVals.push(waves[wk][idx])
|
||||
baseVals.push(noise && noise[idx] !== undefined ? noise[idx] : MAX_ADC)
|
||||
for (r = 0; r < included.length; r++) {
|
||||
def = included[r]
|
||||
var nrs = [] // 该区所有可算波长的 {wave, nr}
|
||||
for (wk in zone) {
|
||||
if (!zone.hasOwnProperty(wk)) continue
|
||||
if (zone[wk][def.key] === undefined || !avg[wk]) continue
|
||||
var ratio = zone[wk][def.key] / avg[wk]
|
||||
var nr = inverted ? (ratio - 1) : (1 - ratio)
|
||||
nrs.push({ wave: wk, nr: Math.round(nr * 1000) / 1000 })
|
||||
}
|
||||
if (!pdVals.length) continue
|
||||
|
||||
var score = _absorption(_avg(pdVals), _avg(baseVals))
|
||||
var level = _levelOf(score, levels)
|
||||
if (level > 0) {
|
||||
problems.push({ type: problemType, level: level, score: Math.round(score * 100) / 100 })
|
||||
if (!overallAcc[problemType] || level > overallAcc[problemType]) {
|
||||
nrs.sort(function (a, b) { return b.nr - a.nr })
|
||||
var top = nrs.length ? nrs[0] : null
|
||||
var hasProblem = !!(top && top.nr > th)
|
||||
var problemType = hasProblem ? WAVE_PROBLEM[top.wave] : null
|
||||
var level = hasProblem ? Math.max(1, _severityLevel(top.nr, severity)) : 0
|
||||
if (problemType && (!overallAcc[problemType] || level > overallAcc[problemType])) {
|
||||
overallAcc[problemType] = level
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
problems.sort(function (a, b) { return (b.level - a.level) || (b.score - a.score) })
|
||||
var top = problems.length ? problems[0] : null
|
||||
regions.push({
|
||||
region: def.key,
|
||||
mask: def.mask,
|
||||
top_problem: top ? top.type : null,
|
||||
level: top ? top.level : 0,
|
||||
problems: problems
|
||||
top_problem: problemType,
|
||||
wave: hasProblem ? top.wave : null,
|
||||
level: level,
|
||||
score: top ? top.nr : 0,
|
||||
nrs: nrs // 全量吸收度，供标定期回看
|
||||
})
|
||||
}
|
||||
|
||||
@@ -134,23 +169,22 @@ function analyze(scanData, config) {
|
||||
}
|
||||
overall.sort(function (a, b) { return b.level - a.level })
|
||||
|
||||
// Recommendation: care each region-with-a-top-problem using that problem's wavelength.
|
||||
// One BLE command carries one wavelength, so plan entries are grouped by wavelength.
|
||||
var planByWave = {}
|
||||
var recommendMask = 0
|
||||
for (var i = 0; i < regions.length; i++) {
|
||||
var reg = regions[i]
|
||||
if (!reg.top_problem) continue
|
||||
var wl = problemWave[reg.top_problem]
|
||||
if (!wl) continue
|
||||
planByWave[wl] = (planByWave[wl] || 0) | reg.mask
|
||||
recommendMask |= reg.mask
|
||||
}
|
||||
// 4) 推荐方案：每个问题区一条（区独立、可不同色），一条 BLE 命令即可全部下发。
|
||||
var recommendPlan = []
|
||||
for (var w in planByWave) {
|
||||
if (!planByWave.hasOwnProperty(w)) continue
|
||||
var code2 = parseInt(w, 10)
|
||||
recommendPlan.push({ wavelength: code2, mask: planByWave[w], label_key: WAVELENGTH_PROBLEM[code2] })
|
||||
var recommendMask = 0
|
||||
for (r = 0; r < regions.length; r++) {
|
||||
var reg = regions[r]
|
||||
if (!reg.top_problem || !reg.wave) continue
|
||||
recommendPlan.push({
|
||||
region: reg.region,
|
||||
mask: reg.mask,
|
||||
wave: reg.wave,
|
||||
wavelength: WAVE_KEY_CODE[reg.wave],
|
||||
label_key: reg.top_problem,
|
||||
level: reg.level,
|
||||
brightness: brightness
|
||||
})
|
||||
recommendMask |= reg.mask
|
||||
}
|
||||
|
||||
return {
|
||||
@@ -165,30 +199,30 @@ function analyze(scanData, config) {
|
||||
}
|
||||
}
|
||||
|
||||
// Adapt the current (single-wavelength red) auto-scan result into scanData, so the
|
||||
// pipeline works today. pdAvg = 7 averaged PD values under red light.
|
||||
function fromRedScan(pdAvg, regionMask, deviceId, scannedAt, noise) {
|
||||
// 把 auto-scan 按波长分桶后的平均值组装成 scanData。
|
||||
// buckets: { red:[7], ir:[7], uv:[7], yellow:[7] } 任意子集（旧固件无波长标识时只有 red）。
|
||||
function buildScanData(buckets, regionMask, deviceId, scannedAt) {
|
||||
return {
|
||||
device_id: deviceId || null,
|
||||
scanned_at: scannedAt || 0,
|
||||
region_mask: regionMask || 0x1F,
|
||||
noise: noise || null,
|
||||
waves: { red: (pdAvg || []).slice(0, 7) }
|
||||
waves: buckets || {}
|
||||
}
|
||||
}
|
||||
|
||||
// Deterministic mock report for UI development / demo when there is no device data.
|
||||
// 无设备数据时的演示报告（开发者工具 mock）。
|
||||
// 数值按已确认极性编造：值大=吸收多 → 左区红光偏高(光老化)、中区紫外偏高(痘痘油脂)。
|
||||
function mockReport() {
|
||||
return analyze({
|
||||
device_id: 'MOCK',
|
||||
scanned_at: 0,
|
||||
region_mask: 0x1F,
|
||||
noise: [4000, 4000, 4000, 4000, 4000, 4000, 4000],
|
||||
waves: {
|
||||
red: [3500, 3600, 1900, 3400, 3450, 3500, 3500],
|
||||
uv: [3700, 3750, 3600, 1700, 3700, 1800, 1900],
|
||||
yellow: [3500, 3550, 3400, 3450, 2300, 3500, 3520],
|
||||
ir: [3600, 3600, 3550, 3580, 3560, 3600, 3600]
|
||||
// 左 中上 中(3路) 中下 右
|
||||
red: [1350, 920, 900, 910, 905, 890, 940],
|
||||
uv: [2050, 2020, 2600, 2560, 2620, 1990, 2080],
|
||||
yellow: [1500, 1520, 1490, 1505, 1495, 1530, 1510],
|
||||
ir: [1800, 1790, 1805, 1795, 1800, 1815, 1790]
|
||||
}
|
||||
}, DEFAULT_CONFIG)
|
||||
}
|
||||
@@ -196,9 +230,10 @@ function mockReport() {
|
||||
module.exports = {
|
||||
DEFAULT_CONFIG: DEFAULT_CONFIG,
|
||||
PROBLEM_WAVELENGTH: PROBLEM_WAVELENGTH,
|
||||
WAVELENGTH_PROBLEM: WAVELENGTH_PROBLEM,
|
||||
WAVE_PROBLEM: WAVE_PROBLEM,
|
||||
WAVE_KEY_CODE: WAVE_KEY_CODE,
|
||||
REGION_DEFS: REGION_DEFS,
|
||||
analyze: analyze,
|
||||
fromRedScan: fromRedScan,
|
||||
buildScanData: buildScanData,
|
||||
mockReport: mockReport
|
||||
}
|
||||
|
||||
+1
-1
@@ -204,4 +204,4 @@ INSERT IGNORE INTO system_settings (setting_key, setting_value) VALUES
|
||||
('enable_binding', 'true'),
|
||||
('enable_free_mode', 'true'),
|
||||
('maintenance_mode', 'false'),
|
||||
('diagnosis_config', '{"calibrated": false, "note": "占位阈值，待真机标定后调整", "levels": {"low": 0.15, "mid": 0.35, "high": 0.55}, "problem_wavelength": {"aging": 2, "acne": 3, "pigment": 4, "deep": 1}}');
|
||||
('diagnosis_config', '{"calibrated": false, "note": "阈值/PD映射为待标定初始值(文档建议值+推测映射)；polarity=inverted 已由固件确认(PD值大=吸收多)；pd_region_map 待固件给出 PD1~7 实际排布后修正", "polarity": "inverted", "th": 0.10, "severity": {"low": 0.05, "mid": 0.15, "high": 0.30}, "brightness": 204, "pd_region_map": {"left": [0], "top": [1], "middle": [2, 3, 4], "bottom": [5], "right": [6]}, "problem_wavelength": {"aging": 2, "acne": 3, "pigment": 4, "deep": 1}}');
|
||||
|
||||
在新工单中引用
屏蔽一个用户