feat(diagnosis): 按新协议实现多光谱诊断算法+分区差异化下发+报告面罩图

- 新协议《协议简述-添加扫描时光色》落地: FFE4 Byte17 高3位=扫描光色(1红/2红外/3紫外/4暖黄), 低5位保留贴合状态; Byte18=0xFF 故障; auto-scan 按光色分桶采集(旧固件无标识归 red 桶降级) - diagnosis.js 重写: PD极性(值大=吸收多,固件已确认) NR=本区/本色5区平均-1; 每区4色argmax>0.10判定; 3路PD区几何平均+MAD剔奇异(3σ对n=3失效,审计实证); 严重度0.05/0.15/0.30仅展示; 全参数走 diagnosis_config 热调(极性/阈值/PD映射/亮度) - buildVendorCommand 支持 plan 多区多色单命令下发(每IO独立红/红外/紫外/暖黄); builder层安全硬上限治疗亮度≤204(80%) 时长≤600s - 区域映射修正: 掩码=IO纵列左0x01/中上0x02/中0x04/中下0x08/右0x10, 修复 treatment-setup/manual/treating/getRegionName/i18n 共7处标签错位, FULL_FACE 0x7F→0x1F - 扫描报告页: 新增分区面罩示意图(5区按推荐光着色+模式名+严重度,点击跳光疗介绍), 推荐护理改一条命令多色下发(亮度204); 扫描中设备故障即时中止 - schema.sql diagnosis_config 种子更新(新结构); i18n 清理死键,中英对齐25/24键
2026-07-28 04:36:51 -07:00
@@ -99,7 +99,7 @@ function handleValueChange(res) {
        console.warn('[BLE] ADC checksum mismatch, dropping')
        return
      }
-      emit('adc', { pd: parsed.pd, vbat: vbatMv, battery: batteryPct, fitting: parsed.fitting, run_state: parsed.run_state })
+      emit('adc', { pd: parsed.pd, vbat: vbatMv, battery: batteryPct, fitting: parsed.fitting, scan_wave: parsed.scan_wave, run_state: parsed.run_state, is_fault: parsed.is_fault })
      emit('battery', { battery: batteryPct, vbat: vbatMv })
      emit('fitting', { fitting: parsed.fitting })
      emit('run_state', { run_state: parsed.run_state })
@@ -57,18 +57,23 @@ var TREAT_MODE = {
  SMART: 1
 }

+// 区域 = IO 纵列布局（果果 2026-07 定案）：左=IO1(0x01)，中上=IO2(0x02)，中=IO3(0x04)，
+// 中下=IO4(0x08)，右=IO5(0x10)。旧命名(左脸颊/额头/鼻部…)来自过时文档，与实物不符，已废弃。
 var REGION = {
-  LEFT_CHEEK: 0x01,
-  RIGHT_CHEEK: 0x02,
-  FOREHEAD: 0x04,
-  CHIN: 0x08,
-  NOSE: 0x10,
-  LEFT_EYE: 0x20,
-  RIGHT_EYE: 0x40,
-  FULL_FACE: 0x7F
+  LEFT: 0x01,
+  TOP: 0x02,
+  MIDDLE: 0x04,
+  BOTTOM: 0x08,
+  RIGHT: 0x10,
+  FULL_FACE: 0x1F
 }

-var REGION_NAMES = ['left_cheek', 'right_cheek', 'forehead', 'chin', 'nose', 'left_eye', 'right_eye']
+var REGION_NAMES = ['left', 'top', 'middle', 'bottom', 'right']
+
+// FFE4 Byte17 高三位 = 扫描时光色指示（协议简述-添加扫描时光色.docx 2026-07）：
+// 001=红光 010=红外 011=紫外(蓝) 100=暖黄。注意与下发命令的 WAVELENGTH 编码
+// (IR=1,R=2,UV=3,Y=4) 不同——1/2 正好是红与红外互换，绝不能复用那套常量。
+var SCAN_WAVE_KEY = { 1: 'red', 2: 'ir', 3: 'uv', 4: 'yellow' }

 var DEVICE_ERR = {
  0x00: 'SUCCESS',
@@ -167,37 +172,64 @@ var CONTROL = {
  TREAT: 0x02
 }

+// 每 IO 6 字节，颜色格顺序 [红][红外][紫外][暖黄]（厂商原表，新版协议简述再次确认）。
+// 两种调用方式：
+//   单色广播（旧）：{ region_mask, wavelength(编码), brightness, ... }
+//   分区差异化（新）：{ plan: [{ mask, wave:'red'|'ir'|'uv'|'yellow', brightness }], hold_time, control }
+//     —— 同一条命令里不同区可用不同颜色不同亮度（协议本身就支持 5 IO × 4 色独立）。
+var WAVE_BYTE_OFFSET = { red: 0, ir: 1, uv: 2, yellow: 3 }
+
+// 安全包线（builder 层硬上限，纵深防御——即使服务端 diagnosis_config 误配也不可突破）：
+// 治疗亮度 ≤204(80%)，单次时长 ≤600s(10min)。固件侧安全机制大多未实现，此处是最后防线。
+var MAX_TREAT_BRIGHTNESS = 204
+var MAX_HOLD_SECONDS = 600
+
 function buildVendorCommand(options) {
  options = options || {}
-  var regionMask = options.region_mask || REGION.FULL_FACE
-  var wavelength = options.wavelength || WAVELENGTH.R
-  var brightness = clampByte(options.brightness === undefined ? 200 : options.brightness)
  var gain = clampUInt16(options.current_gain === undefined ? 0 : options.current_gain)
  var durationMs = options.duration_ms || 600000
  var holdSeconds = clampUInt16(options.hold_time === undefined ? Math.round(durationMs / 1000) : options.hold_time)
  var control = options.control !== undefined ? options.control : CONTROL.TREAT
-  var regions = [
-    REGION.LEFT_CHEEK,
-    REGION.RIGHT_CHEEK,
-    REGION.FOREHEAD,
-    REGION.CHIN,
-    REGION.NOSE
-  ]
+  if (holdSeconds > MAX_HOLD_SECONDS) holdSeconds = MAX_HOLD_SECONDS
+  var isTreat = control === CONTROL.TREAT
+  function clampTreat(b) {
+    b = clampByte(b)
+    return isTreat && b > MAX_TREAT_BRIGHTNESS ? MAX_TREAT_BRIGHTNESS : b
+  }
+  var ioMasks = [REGION.LEFT, REGION.TOP, REGION.MIDDLE, REGION.BOTTOM, REGION.RIGHT] // IO1..IO5
  var bytes = []
+  var i, j

-  for (var i = 0; i < regions.length; i++) {
-    var enabled = (regionMask & regions[i]) !== 0
-    var red = 0
-    var infrared = 0
-    var uv = 0
-    var warmYellow = 0
-    if (enabled) {
-      if (wavelength === WAVELENGTH.R) red = brightness
-      if (wavelength === WAVELENGTH.IR) infrared = brightness
-      if (wavelength === WAVELENGTH.UV) uv = brightness
-      if (wavelength === WAVELENGTH.Y) warmYellow = brightness
+  if (options.plan && options.plan.length) {
+    for (i = 0; i < ioMasks.length; i++) {
+      var slot = [0, 0, 0, 0]
+      for (j = 0; j < options.plan.length; j++) {
+        var p = options.plan[j]
+        if ((p.mask & ioMasks[i]) === 0) continue
+        var off = WAVE_BYTE_OFFSET[p.wave]
+        if (off === undefined) continue
+        slot[off] = clampTreat(p.brightness === undefined ? 200 : p.brightness)
+      }
+      bytes.push(slot[0], slot[1], slot[2], slot[3], (gain >> 8) & 0xFF, gain & 0xFF)
+    }
+  } else {
+    var regionMask = options.region_mask || REGION.FULL_FACE
+    var wavelength = options.wavelength || WAVELENGTH.R
+    var brightness = clampTreat(options.brightness === undefined ? 200 : options.brightness)
+    for (i = 0; i < ioMasks.length; i++) {
+      var enabled = (regionMask & ioMasks[i]) !== 0
+      var red = 0
+      var infrared = 0
+      var uv = 0
+      var warmYellow = 0
+      if (enabled) {
+        if (wavelength === WAVELENGTH.R) red = brightness
+        if (wavelength === WAVELENGTH.IR) infrared = brightness
+        if (wavelength === WAVELENGTH.UV) uv = brightness
+        if (wavelength === WAVELENGTH.Y) warmYellow = brightness
+      }
+      bytes.push(red, infrared, uv, warmYellow, (gain >> 8) & 0xFF, gain & 0xFF)
    }
-    bytes.push(red, infrared, uv, warmYellow, (gain >> 8) & 0xFF, gain & 0xFF)
  }

  bytes.push((holdSeconds >> 8) & 0xFF, holdSeconds & 0xFF)
@@ -217,13 +249,18 @@ function parseVendorStatus(buffer) {
    for (var p = 0; p < 7; p++) {
      pds19.push(bytes[p * 2] | (bytes[p * 2 + 1] << 8))
    }
+    // Byte17 复用：低位=贴合状态(0/1)，高三位=扫描时光色指示（0 表示无标识/非扫描态或旧固件）。
+    // Byte18 运行状态：0=IDLE 1=检测 2=治疗 0xFF=故障。
+    var scanWaveCode = (bytes[16] >> 5) & 0x07
    return {
      type: 'adc',
      is_heartbeat: false,
      pd: pds19,
      vbat: bytes[14] | (bytes[15] << 8),
-      fitting: bytes[16],
+      fitting: bytes[16] & 0x1F,
+      scan_wave: SCAN_WAVE_KEY[scanWaveCode] || null,
      run_state: bytes[17],
+      is_fault: bytes[17] === 0xFF,
      checksum_ok: checksum19 === bytes[18],
      raw_hex: bytesToHex(bytes)
    }
@@ -326,11 +363,13 @@ function parseException(payload) {

 // --- display helpers ---

+// 掩码 = IO 纵列布局（与 REGION 常量一致）。注意：此处为硬编码中文（历史遗留，
+// history/treatment-done 在用）；新页面请改用 i18n common.regions.* 取标签。
 function getRegionName(mask) {
  var names = []
  var bits = [
-    [0x01, '右区'], [0x02, '左区'], [0x04, '上区'],
-    [0x08, '中区'], [0x10, '下区'], [0x20, '左上区'], [0x40, '右上区']
+    [0x01, '左区'], [0x02, '中上区'], [0x04, '中区'],
+    [0x08, '中下区'], [0x10, '右区']
  ]
  for (var i = 0; i < bits.length; i++) {
    if (mask & bits[i][0]) names.push(bits[i][1])
@@ -362,6 +401,7 @@ module.exports = {
  TREAT_MODE: TREAT_MODE,
  REGION: REGION,
  REGION_NAMES: REGION_NAMES,
+  SCAN_WAVE_KEY: SCAN_WAVE_KEY,
  CONTROL: CONTROL,
  DEVICE_ERR: DEVICE_ERR,